Blog messages with the tag 'natural soap':

• pH Testing - three Ways to Check Your Do-it-yourself All-nat

  The most important factor about making your individual natural soap is to get the chemistry right. Not enough lye will produce a comfortable bar that could never cure or consider a prolonged time to treatment. As well a lot lye will lead to a caustic bar, which would remove any organic oils from your pores and skin to probably triggering red pores and skin, or even burning, from minor pockets of lye drinking water.
  
  I have constantly employed phenolphthalein, (pronounced: price no fah thay leen) a liquid that smells like nail polish remover. It normally comes in a dropper bottle, is cheap, and you basically allow a drop on the top rated of your soap. If it turns brilliant pink appropriate away, then there is a large ph issue with your soap. If it turns pinkish following a new minutes, then this would be usual as the soap is even now caustic and not fully neutralized. But if it has no coloration at all, this will indicate a pH standard bar - perfect.
  
  I attempted the litmus papers but favorite my phenolphthalein. Despite the fact that several soapmakers swear by these. These check strips need you to moist a bar of the soap until there is some bubbles and place the strip on the bubbly portion of the bar. After a handful of hundred bars of soap, you will have an skilled eye and be able to notify by hunting if there could be a problem. But in the beginning, I would check every slab.
  
  The pH scale ranges from 1 - 14, and the goal for your soap will be in between six - 10. Generally the numbers you will want for a mild soap would be five - 8. For a more robust hand soap, intention for eight - 10, and for grating later for laundry, you'll want a examining of ten - 12. Some soaps that test high initially will have decrease pH stages later on, so set it apart and retest in a couple of weeks. If you are employing phenolphthalein, then the color you would be looking for would be clear for a mild soap, mild pink for a hand soap, and dark pink for a laundry soap.
  
  Some folks use small electronic pH testers. They are considered much more correct and need to be buffered, or calibrated, prior to making use of. This technique is also the most costly.
  
  Every so typically, when not mixed effectively, lye drinking water will come to the top rated of the soap slab and look like harmless drinking water or oil. This water is incredibly caustic, be extremely careful when moving the slab about in the mold that none of this drips.
  
  REFERENCES:
  
  http://article2008.com/Art/645889/237/Keeping-...
  
  http://iinformyou.com/Art/443645/187/Trying-To...
  
  http://www.articledisc.com/50303/84/Maintainin...

  • 4 September 2011
  • 0 comments
  • no rating